Yayınlar & Eserler

Yayın Ağı
Makaleler 35
Tümü (35)
SCI-E, SSCI, AHCI (30)
SCI-E, SSCI, AHCI, ESCI (30)
Scopus (33)
TRDizin (1)
Diğer Yayınlar (1)

1. Improving the fatigue limit of FSW6061 Al alloy welded joints by surface spinning rolling

Gong B., Zhang Z., Wang H., Liu R., Liu H., PÜRÇEK G., et al.
International Journal of Fatigue , cilt.200, 2025 (SCI-Expanded, Scopus) identifier

2. A novel surface strengthening technique for enhancing fatigue properties of 6061 Al alloy

Gong B., Zhang Z., Liu R., Liu H., Wang H., Wang H., et al.
International Journal of Fatigue , cilt.198, 2025 (SCI-Expanded, Scopus) identifier

3. Effect of Severe Plastic Deformation and Aging States on Microstructure and Mechanical Properties of 2024 Aluminum Alloy

DEMİRTAŞ M., YANAR H., UZUN M., Ustalar M., Zhang Z., Dai R., et al.
Advanced Engineering Materials , cilt.27, sa.9, 2025 (SCI-Expanded, Scopus) identifier

4. Surface Modification of Additively Manufactured Inconel 718 Alloy by Low-Energy High-Current Electron Beam Irradiation

DEMİRTAŞ M., Ivanov K. V., PÜRÇEK G., YANAR H., KAYNAK Y.
Advanced Engineering Materials , cilt.26, sa.23, 2024 (SCI-Expanded, Scopus) identifier

5. Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review

Edalati K., Ahmed A. Q., Akrami S., Ameyama K., Aptukov V., Asfandiyarov R. N., et al.
Journal of Alloys and Compounds , cilt.1002, 2024 (SCI-Expanded, Scopus) identifier

6. Fatigue crack propagation anisotropy of an Al–Zn–Mg–Cu super-thick plate

Wang H., Zhang Z., Hou J., Gong B., Liu H., Abedi H., et al.
International Journal of Fatigue , cilt.187, 2024 (SCI-Expanded, Scopus) identifier

7. High-Cycle-Fatigue Anisotropy of an Aluminum Alloy Superthick Plate

Wang H., Zhang Z., Gong B., Zhou X., Liu R., Abedi H. R., et al.
Advanced Engineering Materials , cilt.26, sa.15, 2024 (SCI-Expanded, Scopus) identifier

8. On the correspondence of bump relief on the surface of materials processed with low-energy high-current electron beam to their grain structure

Ivanov K., Akimov K., DEMİRTAŞ M., PÜRÇEK G.
Vacuum , cilt.225, 2024 (SCI-Expanded, Scopus) identifier

9. Effects of aging state on the low-cycle fatigue properties of 2024 aluminum alloy

Gong B., Zhang Z., Hou J., Liu R., Duan Q., Wang H., et al.
Journal of Materials Research and Technology , cilt.29, ss.2448-2457, 2024 (SCI-Expanded, Scopus) identifier

10. Research on anisotropy of the 7B50 super thick plate

Wang H., Zhang Z., Cong F., Ren W., Gong B., Liu R., et al.
Journal of Alloys and Compounds , cilt.960, 2023 (SCI-Expanded, Scopus) identifier

11. Investigation on the fatigue behavior of 7075 aluminum alloy at different aging states

Gong B., Zhang Z., Hou J., Li R., Liu R., Duan Q., et al.
International Journal of Fatigue , cilt.175, 2023 (SCI-Expanded, Scopus) identifier

12. An Overview of the Principles of Low-Temperature Superplasticity in Metallic Materials Processed by Severe Plastic Deformation

DEMİRTAŞ M., PÜRÇEK G.
Materials Transactions , cilt.64, sa.8, ss.1724-1738, 2023 (SCI-Expanded, Scopus) Creative Commons License identifier

13. Enhancing mechanical and tribological properties of Ni3Al-15vol%TiC composite by high current pulsed electron beam irradiation

DEMİRTAŞ M., Ivanov K. V., PÜRÇEK G., YANAR H.
Journal of Alloys and Compounds , cilt.898, 2022 (SCI-Expanded, Scopus) identifier

14. Effect of hexagonal boron nitride (h-BN) addition on friction behavior of low-steel composite brake pad material for railway applications

YANAR H., PÜRÇEK G., DEMİRTAŞ M., Ayar H. H.
Tribology International , cilt.165, 2022 (SCI-Expanded, Scopus) identifier

15. Microstructural, mechanical and tribological characterization of Cu-Co-Ni-Be alloy processed via equal channel angular pressing

DEMİRTAŞ M.
Materials Today Communications , cilt.28, 2021 (SCI-Expanded, Scopus) identifier

16. The mechanical compression performance of ultra-fine grained stainless steel pyramidal lattice core

KULEYİN H., GÜMRÜK R., YANAR H., DEMİRTAŞ M., PÜRÇEK G.
Mechanics of Advanced Materials and Structures , cilt.28, sa.10, ss.1073-1078, 2021 (SCI-Expanded, Scopus) identifier

17. Optimization of strength, ductility and wear resistance of low-carbon grade A shipbuilding steel by post-ECAP annealing

DEMİRTAŞ M., SEKBAN D. M.
Metallurgical Research and Technology , cilt.118, sa.2, 2021 (SCI-Expanded, Scopus) identifier

18. Effect of resin content on tribological behavior of brake pad composite material

YANAR H., Ayar H. H., DEMİRTAŞ M., PÜRÇEK G.
Industrial Lubrication and Tribology , cilt.72, sa.2, ss.195-202, 2020 (SCI-Expanded, Scopus) identifier

19. Microstructural, mechanical and tribological properties of ultrafine-grained Cu–Cr–Zr alloy processed by high pressure torsion

PÜRÇEK G., YANAR H., DEMİRTAŞ M., Shangina D., Bochvar N., Dobatkin S.
Journal of Alloys and Compounds , cilt.816, 2020 (SCI-Expanded, Scopus) identifier

20. PROCESSING OF GRADE A LOW CARBON STEEL BY EQUAL CHANNEL ANGULAR PRESSING

DEMİRTAŞ M.
ENGINEERING SCIENCES , cilt.9, sa.1, 2020 (TRDizin)

21. Room temperature superplaticity in fine/ultrafine grained materials subjected to severe plastic deformation

DEMİRTAŞ M., PÜRÇEK G.
Materials Transactions , cilt.60, sa.7, ss.1159-1167, 2019 (SCI-Expanded, Scopus) Creative Commons License identifier

22. Effect of long-term natural aging on microstructure and room temperature superplastic behavior of UFG/FG Zn-Al alloys processed by ECAP

DEMİRTAŞ M., YANAR H., PÜRÇEK G.
Letters on Materials , cilt.8, sa.4 Special Issue, ss.532-537, 2018 (Scopus) Creative Commons License identifier

23. Experimental and Numerical Investigation of Thickness Distribution in Forming of Superplastic Zn-22Al Alloy

ÇETİN M. E., DEMİRTAŞ M., PÜRÇEK G., CORA Ö. N., SOFUOĞLU H.
Academic Perspective Procedia , cilt.1, sa.1, ss.1034-1040, 2018 (Hakemli Dergi)

24. High temperature superplasticity and deformation behavior of naturally aged Zn-Al alloys with different phase compositions

DEMİRTAŞ M., Kawasaki M., YANAR H., PÜRÇEK G.
Materials Science and Engineering: A , cilt.730, ss.73-83, 2018 (SCI-Expanded, Scopus) identifier

25. Effect of grain refinement and phase composition on room temperature superplasticity and damping capacity of dual-phase Zn-Al alloys

DEMİRTAŞ M., Atli K. C., YANAR H., PÜRÇEK G.
Journal of Materials Research , cilt.33, sa.8, ss.1032-1045, 2018 (SCI-Expanded, Scopus) identifier

26. Influence of high pressure torsion-induced grain refinement and subsequent aging on tribological properties of Cu-Cr-Zr alloy

PÜRÇEK G., YANAR H., Shangina D., DEMİRTAŞ M., Bochvar N., Dobatkin S.
Journal of Alloys and Compounds , cilt.742, ss.325-333, 2018 (SCI-Expanded, Scopus) identifier

27. Room Temperature Superplasticity in Fine/Ultrafine-Grained Zn-Al Alloys with Different Phase Compositions

DEMİRTAŞ M., YANAR H., SARAY O., PÜRÇEK G.
DEFECT AND DIFFUSION FORUM , cilt.385, ss.72-77, 2018 (Scopus)

28. Enhancing the Damping Behavior of Dilute Zn-0.3Al Alloy by Equal Channel Angular Pressing

DEMİRTAŞ M., Atli K., YANAR H., PÜRÇEK G.
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , cilt.48, sa.6, ss.2868-2876, 2017 (SCI-Expanded, Scopus) identifier

29. Effects of grain size on room temperature deformation behavior of Zn–22Al alloy under uniaxial and biaxial loading conditions

Cetin M., DEMİRTAŞ M., SOFUOĞLU H., CORA Ö. N., PÜRÇEK G.
Materials Science and Engineering: A , cilt.672, ss.78-87, 2016 (SCI-Expanded, Scopus) identifier

30. Effect of different processes on lamellar-free ultrafine grain formation, room temperature superplasticity and fracture mode of Zn-22Al alloy

DEMİRTAŞ M., PÜRÇEK G., YANAR H., Zhang Z., Zhang Z.
Journal of Alloys and Compounds , cilt.663, ss.775-783, 2016 (SCI-Expanded, Scopus) identifier

31. Optimization of strength, ductility and electrical conductivity of Cu-Cr-Zr alloy by combining multi-route ECAP and aging

PÜRÇEK G., YANAR H., DEMİRTAŞ M., ALEMDAĞ Y., Shangina D., Dobatkin S.
Materials Science and Engineering: A , cilt.649, ss.114-122, 2016 (SCI-Expanded, Scopus) identifier

32. Effect of equal-channel angular pressing on room temperature superplasticity of quasi-single phase Zn-0.3Al alloy

DEMİRTAŞ M., PÜRÇEK G., YANAR H., Zhang Z., Zhang Z.
Materials Science and Engineering: A , cilt.644, ss.17-24, 2015 (SCI-Expanded, Scopus) identifier

33. Effect of Chemical Composition and Grain Size on RT Superplasticity of Zn Al alloys processed by ECAP

DEMİRTAŞ M., PÜRÇEK G., YANAR H., Zhang Z., Zhang Z.
Letters on Materials , cilt.5, sa.3, ss.328-334, 2015 (Scopus)

34. Achieving room temperature superplasticity in Zn-5Al alloy at high strain rates by equal-channel angular extrusion

DEMİRTAŞ M., PÜRÇEK G., YANAR H., Zhang Z., Zhang Z.
Journal of Alloys and Compounds , cilt.623, ss.213-218, 2015 (SCI-Expanded, Scopus) identifier

35. Improvement of high strain rate and room temperature superplasticity in Zn-22Al alloy by two-step equal-channel angular pressing

DEMİRTAŞ M., PÜRÇEK G., YANAR H., Zhang Z., Zhang Z.
Materials Science and Engineering: A , cilt.620, ss.233-240, 2015 (SCI-Expanded, Scopus) identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 26

1. Improvement of surface microstructural and wear properties of Ni3Al-TiC composite with pulsed electron beam irradiation

PÜRÇEK G., DEMİRTAŞ M., YANAR H., V. Ivanov K.
Physics and Technology of Advanced Materials-2021, 5-8 October 2021, Ufa, Russia, Ufa, Rusya, 5 - 08 Ekim 2021, (Özet Bildiri)

2. Tribological behavior of severely deformed copper alloy at elevated temperature

DEMİRTAŞ M.
4. Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’21), Nevşehir, Türkiye, 28 - 30 Mayıs 2021, (Özet Bildiri)

3. Mechanical and Tribological Behavior of Al-Si Alloy Processed via Two-Step ECAP

DEMİRTAŞ M.
2. International Conference on Materials Science, Mechanical and Automotive Engineerings And Technology, Nevşehir, Türkiye, 21 - 23 Haziran 2019, (Özet Bildiri)

4. Mechanical Properties of Low Carbon Steel Processed by Equal Channel Angular Pressing

DEMİRTAŞ M.
Fourth International Iron and Steel Symposium (UDCS’19), 4 - 06 Nisan 2019, (Özet Bildiri)

5. Experimantal and numerical investigation of thickness distribution in forming of superplastic Zn-22Al alloy

ÇETİN M. E., DEMİRTAŞ M., PÜRÇEK G., CORA Ö. N., SOFUOĞLU H.
6th international semposium on innovative technologies in engineering and science, Antalya, Türkiye, 9 - 11 Kasım 2018, (Tam Metin Bildiri)

6. Room temperature superplasticity in fine/ultrafine-grained Zn-Al alloys with different phase composition

DEMİRTAŞ M., YANAR H., SARAY O., PÜRÇEK G.
The 13th International Conference on Superplasticity in Advanced Materials (ICSAM2018), Pietersburg, Güney Afrika, 19 - 22 Ağustos 2018, (Özet Bildiri)

7. Effect of Long-Term Natural Aging on Room Temperature Superplasticity of Zn-Al Alloys

DEMİRTAŞ M., YANAR H., PÜRÇEK G.
The 13th International Conference on Superplasticity in Advanced Materials (ICSAM2018), Pietersburg, Güney Afrika, 19 - 22 Ağustos 2018, (Özet Bildiri)

8. Effect of Resin Content on Friction and Wear Behaviour of NonAsbestos Composite Friction Material Used in Brake Pad

YANAR H., AYAR H. H., DEMİRTAŞ M., PÜRÇEK G.
2th International Conference On Tribology (Turkeytrib’18), İstanbul, Türkiye, 18 - 20 Nisan 2018, (Özet Bildiri)

9. A New Multi-Functional Tribometer: Application of Block-on-Ring Test Module

YANAR H., DEMİRTAŞ M., PÜRÇEK G.
2th International Conference On Tribology (Turkeytrib’18), İstanbul, Türkiye, 18 - 20 Nisan 2018, (Özet Bildiri)

10. Room temperature superplasticity in fine/ultrafine-grained Zn-Al alloys with different phase compositions

DEMİRTAŞ M., YANAR H., Saray O., PÜRÇEK G.
13th International Conference on Superplasticity in Advanced Materials, ICSAM 2018, Petersburg, Rusya, 19 - 22 Ağustos 2018, cilt.385 DDF, ss.72-77, (Tam Metin Bildiri) identifier

11. Effect of Grain Size on Microhardness of Superplastic Zn-22Al

ÇETİN M. E., DEMİRTAŞ M., SOFUOĞLU H., CORA Ö. N., PÜRÇEK G.
International Conference on Engineering Technologies, Konya, Türkiye, 7 - 09 Aralık 2017, (Özet Bildiri)

12. İki aşamalı hadde işlemine tabi tutulan Zn-Al alaşımlarında oda sıcaklığında süperplastisite-benzeri davranış

DEMİRTAŞ M., YANAR H., PÜRÇEK G.
International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, (Özet Bildiri)

13. Relationship Between Superplasticity and Damping Capacity in Naturally Aged Zn-Al Alloys

DEMİRTAŞ M., ATLI K. C., YANAR H., PÜRÇEK G.
European Congressand exhibition on advanced materials and processes EUROMAT 2017, Thessaloniki, Yunanistan, 17 - 22 Eylül 2017, (Özet Bildiri)

14. Severe PlasticDeformation Induced Dynamic Precipitation in Cu-Cr-Zr Alloy

YANAR H., PÜRÇEK G., DEMİRTAŞ M., Shangina D., Dobatkin S.
EUROMAT2017, European Congress and Exhibition on Advanced Materals and Processes, 17 - 22 Eylül 2017, (Özet Bildiri)

15. Superplastic behaviors of severely deformed and naturally aged Zn-Al alloys at room and elevated temperatures

DEMİRTAŞ M., Megumi K., YANAR H., PÜRÇEK G.
European Congress and Exhibitaion on Advanced Materials and Processes (EUROMAT 2017), Thessaloniki, Yunanistan, 12 - 17 Eylül 2017, (Özet Bildiri)

16. A new multifunctional tribometer with high temperature module

YANAR H., DEMİRTAŞ M., PÜRÇEK G.
9th INTERNATIONAL CONFERENCE ON TRIBOLOGY BALKANTRIB’17, Kapadokya Nevşehir, Türkiye, 13 - 15 Eylül 2017, (Özet Bildiri)

17. Effect of Fiber Content on the Friction and Wear Performance of Non-asbestos Composites Used in Brake Pads

YANAR H., DEMİRTAŞ M., AYAR H., PÜRÇEK G.
9th INTERNATIONAL CONFERENCE ON TRIBOLOGY, BALKANTRIB’17, Kapadokya Nevşehir, 13 - 15 Eylül 2017, (Özet Bildiri)

18. Effect of testing temperature on tribological properties of a Cu-Cr-Zr alloy in different microstructural conditions

YANAR H., Shangina D. V., DEMİRTAŞ M., Dobatkin S. V., PÜRÇEK G.
9th INTERNATIONAL CONFERENCE ON TRIBOLOGY, BALKANTRIB’17, Kapadokya Nevşehir, Türkiye, 13 - 15 Eylül 2017, (Özet Bildiri)

19. Effect of Hexagonal Boron Nitride (h-BN) Addition on The Friction And Wear Characteristics of Non-Asbestos Composites Used in Brake Pads

YANAR H., AYAR H., DEMİRTAŞ M., PÜRÇEK G.
IX IBERIAN CONFERENCE on TRIBOLOGY, GUIMARÃES, PORTUGAL, Portekiz, 12 - 13 Haziran 2017, (Özet Bildiri)

20. Optimization of RT superplasticity of UFG Zn-22Al alloy by applying ECAP at different temperatures and phase regions

DEMİRTAŞ M., YANAR H., PÜRÇEK G.
7th International Conference on Nanomaterials by Severe Plastic Deformation, NanoSPD 2017, Sydney, Avustralya, 2 - 07 Temmuz 2017, cilt.194, (Tam Metin Bildiri) identifier

21. EFFECT OF ACCUMULATIVE STRAIN ON ROOM TEMPERATURE SUPERPLASTICITY OF DILUTE ZN 0 3AL ALLOY

DEMİRTAŞ M., YANAR H., PÜRÇEK G.
16th International Materials Symposium IMSP'2016, Türkiye, 12 - 14 Ekim 2016, (Tam Metin Bildiri)

22. Effect of natural aging on RT and HSR superplasticity of ultrafine grained Zn-22Al alloy

DEMİRTAŞ M., PÜRÇEK G., YANAR H., Zhang Z., Zhang Z.
12th International Conference on Superplasticity in Advanced Materials, ICSAM 2015, Tokyo, Japonya, 7 - 11 Eylül 2015, cilt.838-839, ss.320-325, (Tam Metin Bildiri) identifier

23. Süperplastik Zn 22al Alaşımında Ultra İnce Tane Oluşumunun Oda Sıcaklığındaki Şekillendirilebilirliğe Etkisinin Deneysel Ve Teorik Olarak İncelenmesi

ÇETİN M. E., DEMİRTAŞ M., SOFUOĞLU H., CORA Ö. N., PÜRÇEK G.
19. Ulusal Mekanik Kongresi, Trabzon, Türkiye, 24 - 28 Ağustos 2015, (Tam Metin Bildiri)

24. Improvement in Room Temperature Damping Capacity of Zn 22Al Alloy by Ultrafine Grain Formation

DEMİRTAŞ M., PÜRÇEK G., YANAR H., Zhang Z., Zhang Z.
NanoSPD-6 (Nanomaterials by Severe Plastic Deformation), Metz, Fransa, 30 Haziran - 04 Temmuz 2014, (Özet Bildiri)

25. High strain rate superplasticity at room temperature in two phase and quasi single phase Zn Al alloys

DEMİRTAŞ M., PÜRÇEK G., YANAR H., Zhang Z., Zhang Z.
NanoSPD-6 (Nanomaterials by Severe Plastic Deformation), Matez, Fransa, 30 Haziran - 04 Temmuz 2014, (Özet Bildiri)

26. Developing an Ultrafine Grained and or Nanostructured Superplastic Zn 22Al Alloy for Passive Seismic Damper Material

DEMİRTAŞ M., PÜRÇEK G., SARAY O., YANAR H.
NanoTR-9, Erzurum, Türkiye, 24 - 28 Nisan 2013, (Özet Bildiri)
Metrikler

Yayın

61

Yayın (WoS)

30

Yayın (Scopus)

36

Atıf (Scopus)

1006

H-İndeks (Scopus)

15

Proje

5

Açık Erişim

3
BM Sürdürülebilir Kalkınma Amaçları