Yayınlar & Eserler

Yayın Ağı
Makaleler 31
Tümü (31)
SCI-E, SSCI, AHCI (22)
SCI-E, SSCI, AHCI, ESCI (22)
Scopus (22)
TRDizin (4)
Diğer Yayınlar (5)

1. Optimizing selective laser melting (SLM) of Ti6Al4V via Box-Behnken design: Linking process parameters to mechanical properties

KORKMAZ Y., ÇELİK İ., ŞENSOY A. T., VAROL T., Yilmaz E. C.
Optics and Laser Technology , cilt.202, 2026 (SCI-Expanded, Scopus) identifier identifier

2. Bioinspired Sternal Implant Design for Generic Anatomical Reconstruction: An In Silico Framework for Material Selection and Biomechanical Validation

Şensoy A. T.
BIOMIMETICS (BASEL) , cilt.11, ss.1-15, 2026 (SCI-Expanded, Scopus) identifier

3. Evaluation of Lubricant Selection and Lubrication Intervals for Pin–Bushing Bearings Operating Under High-Temperature Conditions in Heavy-Duty Construction Machinery

Celik İ., Şensoy A. T., Sezer S. B.
Lubricants , cilt.14, sa.4, 2026 (SCI-Expanded, Scopus) identifier identifier

4. Influence of Prosthetic Material Properties and Implant Number on Stress Distribution in Implant–Bone Systems Under Bruxism Loading: A Finite Element Study

Aslan D., Korkmaz İ. H., YANIKOĞLU N., ŞENSOY A. T.
Biomimetics , cilt.11, sa.2, 2026 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

5. Effect of Erbium Addition to A380 Aluminum Alloy on Mechanical and Microstructural Properties

Gültekin Ç., ÇOLAK M., Tabak Y., ŞENSOY A. T.
JOM , cilt.78, sa.2, ss.2036-2045, 2026 (SCI-Expanded, Scopus) identifier

6. CF-PEEK vs. Titanium Dental Implants: Stress Distribution and Fatigue Performance in Variable Bone Qualities

POLAT SAĞSÖZ N., Murat F., SEVİNÇ GÜL S. N., ŞENSOY A. T., Kaymaz I.
Biomimetics , cilt.10, sa.9, 2025 (SCI-Expanded, Scopus) identifier identifier

7. Reliability-Based Topology Optimization Considering Overhang Constraints for Additive Manufacturing Design

Murat F., Kaymaz I., ŞENSOY A. T.
Applied Sciences (Switzerland) , cilt.15, sa.11, 2025 (SCI-Expanded, Scopus) identifier

8. Improving Deep Drawing Quality of DD13 Sheet Metal: Optimization of Process Parameters Using Box–Behnken Design

ÇELİK İ., ŞENSOY A. T., Seven G., Cicek D.
Materials , cilt.18, sa.7, 2025 (SCI-Expanded, Scopus) identifier identifier

9. Evaluation of Biomechanical Effects of Mandible Arch Types in All-on-4 and All-on-5 Dental Implant Design: A 3D Finite Element Analysis

SEVİNÇ GÜL S. N., Murat F., ŞENSOY A. T.
Journal of Functional Biomaterials , cilt.16, sa.4, 2025 (SCI-Expanded, Scopus) identifier identifier

10. Identification of GABA producing strains from sourdoughs and optimization of GABA production by response surface-integrated particle swarm approach

Alkay Z., ŞENSOY A. T., Durak M. Z., Tuncil Y. E., Dertli E.
Preparative Biochemistry and Biotechnology , cilt.55, sa.10, ss.1221-1230, 2025 (SCI-Expanded, Scopus) identifier identifier

11. Predictive mathematical modeling of biomechanical behavior in all-on-4 implants design: effects of distal implant and occlusal load angulation using RSM based on FEA

Murat F., SEVİNÇ GÜL S. N., ŞENSOY A. T.
Frontiers in Bioengineering and Biotechnology , cilt.13, 2025 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

12. Biomechanical Solutions for Diabetic Foot Complications:Material and Design Approaches

ALAGHBARY M., ŞENSOY A. T.
International Journal of Advanced Natural Sciences and Engineering Researches , cilt.8, sa.9, ss.229-236, 2024 (Hakemli Dergi)

13. Magnetically Controlled Spinal Implants: Current Trends, Future Perspectives, and Challenges

AKSOY F. Z., ŞENSOY A. T.
International Journal of Advanced Natural Sciences and Engineering Researches , cilt.8, sa.9, ss.224-228, 2024 (Hakemli Dergi)

14. DETERMINING THE OPTIMUM PARKING ANGLES FOR VARIOUS RECTANGULAR-SHAPED PARKING AREAS: A PARTICLE SWARM OPTIMIZATION-BASED MODEL

ÇAKICI Z., ŞENSOY A. T.
Konya mühendislik bilimleri dergisi (Online) , cilt.11, sa.4, ss.1016-1034, 2023 (TRDizin) identifier

15. Estimating the effect of certain manufacturing parameters for fiber laminated composites: A validated DQM model integrated with RSM

Maraş S., ŞENSOY A. T.
Engineering Analysis with Boundary Elements , cilt.155, ss.169-181, 2023 (SCI-Expanded, Scopus) identifier

16. Determining the Optimum Process Parameters of Selective Laser Melting via Particle Swarm Optimization Based on the Response Surface Method

Murat F., Kaymaz İ., ŞENSOY A. T., Korkmaz İ. H.
Metals and Materials International , cilt.29, sa.1, ss.59-70, 2023 (SCI-Expanded, Scopus) identifier

17. Finite Element Analysis-Based Evaluation of the Patient-Specific Spinal Rods for a Reduced Risk of Adjacent Segment Disease

ŞENSOY A. T.
Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.12, sa.4, ss.2408-2415, 2022 (TRDizin) identifier

18. Farklı Fiber Yönlenme Açılarının Tabakalı Kompozit Kirişlerin Doğal Frekansına Etkisinin Yanıt Yüzey Metodu ile İncelenmesi

MARAŞ S., ŞENSOY A. T.
Avrupa Bilim ve Teknoloji Dergisi , cilt.43, ss.48-54, 2022 (Hakemli Dergi)

19. Evaluation of Graft Harvesting Operations from Anterior and Posterior Iliac Donor Sites by Finite Element Analysis

ŞENSOY A. T., KORKMAZ İ. H., MEDETALİBEYOĞLU F., KAYMAZ İ.
Caucasian Journal of Science , cilt.9, sa.1, ss.35-48, 2022 (Hakemli Dergi)

20. Numerical simulation and mathematical modeling of the casting process for pearlitic spheroidal graphite cast iron

ŞENSOY A. T.
Open Chemistry , cilt.20, sa.1, ss.1202-1211, 2022 (SCI-Expanded, Scopus) Creative Commons License identifier

21. An application of finite element method in material selection for dental implant crowns

ŞENSOY A. T., Çolak M., Kaymaz I., Findik F.
Biomedizinische Technik , cilt.66, sa.4, ss.429-436, 2021 (SCI-Expanded, Scopus) identifier identifier

22. Biomechanical evaluation of a novel mandibular distraction osteogenesis protocol: an in-vitro validation and the practical use of the method

ŞENSOY A. T., Kaymaz I., ERTAŞ Ü.
Computer Methods in Biomechanics and Biomedical Engineering , cilt.24, sa.7, ss.765-776, 2021 (SCI-Expanded, Scopus) identifier identifier

23. Investigating the Optimum Model Parameters for Casting Process of A356 Alloy: A Cross-validation Using Response Surface Method and Particle Swarm Optimization

ŞENSOY A. T., Çolak M., Kaymaz I., Dışpınar D.
Arabian Journal for Science and Engineering , cilt.45, sa.11, ss.9759-9768, 2020 (SCI-Expanded, Scopus) identifier

24. Determining the optimum model parameters for oligosaccharide production efficiency using response surface integrated particle swarm optimization method: an experimental validation study

ŞENSOY A. T., İspirli H., Dertli E.
Preparative Biochemistry and Biotechnology , cilt.50, sa.8, ss.820-826, 2020 (SCI-Expanded, Scopus) identifier identifier

25. Simulation and optimization of gamma-ray linear attenuation coefficients of barite concrete shields

ŞENSOY A. T., Gökçe H.
Construction and Building Materials , cilt.253, 2020 (SCI-Expanded, Scopus) identifier

26. Development of particle swarm and topology optimization-based modeling for mandibular distractor plates

ŞENSOY A. T., Kaymaz I., ERTAŞ Ü.
Swarm and Evolutionary Computation , cilt.53, 2020 (SCI-Expanded, Scopus) identifier

27. Optimal Material Selection for Total Hip Implant: A Finite Element Case Study

ŞENSOY A. T., Çolak M., Kaymaz I., Findik F.
Arabian Journal for Science and Engineering , cilt.44, sa.12, ss.10293-10301, 2019 (SCI-Expanded, Scopus) identifier

28. Eklemeli Üretim İle Elde Edilen Fonksiyonel Kademelendirilmiş Gözenekli İmplantlar

MURAT F., KORKMAZ İ. H., ŞENSOY A. T., KAYMAZ İ.
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , cilt.7, sa.3, ss.540-553, 2019 (TRDizin) identifier

29. Optimum Vida Konfigürasyonu Probleminin Adaptif Parçacık Sürü Yöntemi ile Çözümü için MATLAB-PYTHON-ANSYS Döngüsünün Geliştirilmesi

ŞENSOY A. T., KAYMAZ İ.
FİGES İLERİ MÜHENDİSLİK VE ARGE TEKNOLOJİLERİ DERGİSİ , sa.23, ss.18-21, 2019 (Hakemsiz Dergi)

30. Determining the Patient-Specific Optimum Osteotomy Line for Severe Mandibular Retrognathia Patients

ŞENSOY A. T., Kaymaz I., ERTAŞ Ü., KİKİ A.
Journal of Craniofacial Surgery , cilt.29, sa.5, 2018 (SCI-Expanded, Scopus) identifier identifier

31. Kallus Stabilizasyonu’nda Optimum Vida Konfigürasyonunun Belirlenmesi

ŞENSOY A. T., KAYMAZ İ., ERTAŞ Ü.
Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.18, sa.3, ss.135-146, 2014 (TRDizin)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 20

1. Biomechanical Solutions for Diabetic Foot Complications: Material and Design Approaches

ALAGHBARY M., ŞENSOY A. T.
5TH INTERNATIONAL CONFERENCE ON INNOVATIVE ACADEMIC STUDIES, Türkiye, 10 Ekim 2024, ss.91, (Özet Bildiri)

2. Magnetically Controlled Spinal Implants: Current Trends, Future Perspectives, and Challenges

AKSOY F. Z., ŞENSOY A. T.
5TH INTERNATIONAL CONFERENCE ON INNOVATIVE ACADEMIC STUDIES, Türkiye, 10 Ekim 2024, ss.81, (Özet Bildiri)

3. Investigating the fluidity of A356 alloy depending on the section type and the area under varying casting temperatures

ŞENSOY A. T., ÇOLAK M., DIŞPINAR D.
5th International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 25 Eylül 2024, (Tam Metin Bildiri)

4. The Determination of the Optimal Material Combination for Total Hip Prosthesis Components Using Parametric Finite Element Analysis

Ağıl İ., ALİBEYOĞLU F., ŞENSOY A. T.
15th Annual Meeting of the Danish Society of Biomechanics, Danimarka, 24 Kasım 2023, (Özet Bildiri)

5. A verified DQM model combined with RSM for calculating the impact of factors affecting the buckling load of laminated composites

MARAŞ S., ŞENSOY A. T.
1st International Conference on Frontiers in Academic Research, Konya, Türkiye, 18 - 21 Şubat 2023, ss.219, (Özet Bildiri)

6. Tabakalı Kompozit Kirişlerde Fiber Yönlenme Açılarının Yapının Doğal Frekansına Olan Etkisinin İncelenmesi

MARAŞ S., ŞENSOY A. T.
4 th International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 10 Kasım - 13 Ekim 2022, ss.407, (Özet Bildiri)

7. Obtaining the Additive Manufacturing Process Parameters Using Response Surface Based Optimization Method

MURAT F., KAYMAZ İ., ŞENSOY A. T., KORKMAZ İ. H.
The International Conference of Materials and Engineering Technology, Gaziantep, Türkiye, 5 - 07 Kasım 2020, ss.543, (Özet Bildiri)

8. A Literature Review on Supersonic Shear Stress Imaging and its in-vivo Applications

ŞENSOY A. T., ÖZCAN C.
3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.332-339, (Tam Metin Bildiri)

9. A Literature Review on Magnetic Resonance Elastography and its in-vivo Applications

ÖZCAN C., ŞENSOY A. T.
3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.321-331, (Tam Metin Bildiri)

10. Comparative Finite Element Analysis of Iliac Bone From Posterior and Anterior Osteotomy

MEDETALİBEYOĞLU F., KORKMAZ İ. H., KAYMAZ İ., ŞENSOY A. T., KILINÇ A.
9th International Biomechanics Congress, Eskişehir, Türkiye, 19 - 22 Eylül 2018, ss.191, (Özet Bildiri)

11. Stability Assessment of Different Osteotomy Lines for Mandibular Distraction Osteogenesis Using In-vitro Operated Mandibles

ŞENSOY A. T., KAYMAZ İ., ERTAŞ Ü., KORKMAZ İ. H., MURAT F.
9th International Biomechanics Congress, Eskişehir, Türkiye, 19 - 22 Eylül 2018, ss.137, (Tam Metin Bildiri)

12. Comparative Stability Assessment of In-vitro Operated Mandibles via Numerical and Experimental Models

ŞENSOY A. T., KAYMAZ İ., ERTAŞ Ü., KORKMAZ İ. H., YILDIZ F., MURAT F.
1. International Technological Sciences and Design Symposium, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.376, (Özet Bildiri)

13. Effect of chewing characteristics on mandibular callus stability

ŞENSOY A. T., KAYMAZ İ.
International Symposium on Multidisciplinary Studies and Innovative Technologies, Tokat, Türkiye, 2 - 04 Kasım 2017, ss.110, (Özet Bildiri)

14. Is It Possible to Prevent The Adjacent Segment Disease Using Flexible Rods for Spinal Implants? : A Finite Element Analysis

ŞENSOY A. T., KAYMAZ İ.
International Symposium on Multidisciplinary Studies and Innovative Technologies, Tokat, Türkiye, 2 - 04 Kasım 2017, ss.111, (Özet Bildiri)

15. Effect of Femoral Stem Surface Roughness on the Biomechanical Stability of Hip Implant : A Finite Element Study

ŞENSOY A. T., KAYMAZ İ.
2. International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1458, (Özet Bildiri)

16. Kalça Protezi İçin Malzeme Seçimi

ŞENSOY A. T., KAYMAZ İ., FINDIK F., ÇOLAK M.
2. International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1589, (Özet Bildiri)

17. Does stair-step mandibular osteotomy on angulus region positively affect the callus stability?

ŞENSOY A. T., KAYMAZ İ.
2. International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1459, (Özet Bildiri)

18. Stability Of Callus After Mandibular Distraction Osteogenesis: Finite Element Analysis

ŞENSOY A. T., KAYMAZ İ., ERTAŞ Ü.
Uluslararası Katılımlı 8. Ulusal Biyomekanik Kongresi, Ankara, Türkiye, 19 - 23 Ekim 2016, ss.19-21, (Özet Bildiri)

19. İnsan Omurgasına Sanal Cerrahi İle Yerleştirilen Mikroçatlaklı Pedikül Vidalardaki Mekanik Davranışın Sonlu Elemanlar Yöntemiyle İncelenmesi

ŞENSOY A. T., KAYMAZ İ., ALSARAN A.
Mühendislikte Yeni Teknolojiler Sempozyumu, Bayburt, Türkiye, 22 - 24 Ekim 2015, ss.300, (Özet Bildiri)

20. Determining the optimum screw configuration for the stabilization of callus

ŞENSOY A. T., KAYMAZ İ., ERTAŞ Ü.
7. Uluslararası Katılımlı Ulusal Biyomekanik Kongresi, Isparta, Türkiye, 16 - 18 Ekim 2014, ss.158, (Özet Bildiri)
Kitaplar 2

1. Biyomekanik

ALİBEYOĞLU F., ŞENSOY A. T.
Biyomedikal Mühendisliğine Giriş, Fatih Alibeyoğlu, Editör, Nobel Yayınevi, Ankara, ss.173-224, 2023

2. Biyomedikal Alanda Yapay Zeka: Uygulama Örnekleri

ŞENSOY A. T., ALİBEYOĞLU F.
TEKNOBİLİM-2023: Yapay Zeka ve Mühendislik, EFE AKADEMİ, İstanbul, ss.183-196, 2023
Metrikler

Yayın

53

Yayın (WoS)

22

Yayın (Scopus)

22

Atıf (Scopus)

197

H-İndeks (Scopus)

7

Atıf (Scholar)

261

H-İndeks (Scholar)

8

Atıf (TrDizin)

3

H-İndeks (TrDizin)

1

Atıf (Diğer Toplam)

3

Proje

7

Fikri Mülkiyet

1

Tez Danışmanlığı

1

Açık Erişim

3